The whole structure of the hydraulic press brake
Welded structure: the stress of the welded parts can be eliminated by vibration; so this forging press gives high accuracy.
Frame: consists of right and left wall boards, working table, oil box, slot steel and etc. The stress of the welded parts can be eliminated by vibration. The machine enjoys high accuracy and high strength and can be transported easily.
High accuracy,high efficiency,simple and convenient operation,good performance, favorable price and best service.
1. Hydraulic system
Adopt integrated hydraulic control system, more reliable
Consist of motor, oil pump and valve groups
Be installed at the top of the oil box, which can assure that the cylinder is always full of oil when the slide is moving down at high speed
Complete working cycle can be realized through the control of hydraulic valve.
The working pressure at the right side of the wall board can be adjusted by the remote adjustment valve
2. Protective fence and the safety INTERLOCK :
Protective fence and the safety interlocker to ensure the operation safety. Power supply switch that is set in the electric box will be automatically turned off when the box's door is opened or the fence is turned up. Protecting barrier with safety interlocker is mounted on the back of the machine. Another, there are travel limit protection and foot pedestal mounted emergency off switch.
3. Synchro control system
Slide syncho system: adopt steel torsion bar synchro system, simple in structure and high in accuracy
2 ends of slide has 2 synchro fork which make,The system uses upper die compensation to improve the brake precision.
Adopt upper die compensation to improve the brake precision
4. Sectional Ram Clamp Bars
Separate sectional clamping bars are supplied as standard equipment in order to securely fasten short dies, as well as standard length tooling. Unique crown correcting device is standard.
5. Advance technology and procedures
This metal machining tool is a kind of steel torsion bar synchro press brake. -Electronic control of back gauges and ram stroke, data displayed and manual setting
Process of cylinder and sealing component:
Cylinder: no.45# steel treated, inner holes fine machined and extruded.
Valve rods: no.45# steel treated, nickel and phosphorous coated outside.
|Pressure||Of table||Between||Depth||Stroke||Times||Open height||Power||Dimensions|
|80T/2500||800||2500||2050||250||140||10||395||7.5||2605 x1725 x2355|
|80T/3200||800||3200||2660||250||140||10||395||7.5||3300 x1725 x2405|
|100T/2500||1000||2500||2050||320||140||8||395||7.5||2600 x1800 x2540|
|100T/3200||1000||3200||2660||320||140||8||395||7.5||3290 x1740 x2400|
|100T/4000||1000||4000||3060||320||140||8||395||7.5||4090 x1740 x2500|
|100T/5000||1000||5000||3960||320||140||8||395||7.5||5100 x1740 x2800|
|125T/3200||1250||3200||2510||320||140||8||395||7.5||3450 x1740 x2450|
|125T/4000||1250||4000||3160||320||140||8||395||7.5||4090 x1740 x2450|
|160T/3200||1600||3200||2540||330||200||6||457||11||3280 x1930 x2800|
|160T/4000||1600||4000||3140||330||200||6||457||11||4080 x1930 x2800|
|160T/4500||1600||4500||3300||330||200||6||457||11||4580 x1930 x2800|
|200T/3200||2000||3200||3140||330||200||3||457||11||4080 x1930 x2800|
|250T/5000||2500||5000||3900||400||200||5||560||18.5||5550 x1900 x3100|
|300T/3200||3000||3200||2500||400||250||3||630||18.5||3750 x2200 x3100|
|300T/4000||3000||4000||3070||400||250||3||630||22||4550 x2200 x3300|
|300T/5000||3000||5000||3900||400||250||3||630||22||5550 x2200 x3400|
|300T/6000||3000||6000||4900||400||250||3||630||30||6550 x2200 x3500|
|400T/4000||4000||4000||3000||400||300||2.5||770||22||4550 x2600 x3500|
|400T/5000||4000||5000||3900||400||300||2.5||770||30||5550 x2600 x3700|
|400T/6000||4000||6000||4900||400||300||2.5||770||22||6550 x2600 x3800|
|500T/4000||5000||4000||3000||450||350||2.5||860||37||4550 x2800 x3700|
|500T/5000||5000||5000||3900||450||350||2.5||860||46||5550 x2800 x3800|
|500T/6000||5000||6000||4900||450||350||2.5||860||55||6500 x2800 x3800|
|600T/6000||6000||6000||4900||450||350||2.5||860||60||6550 x3000 x4200|
1. Steel-welded construction, vibration to eliminate stress with high strength and good rigidity;
2. Italy ATOS valves or American OMG vales optional;
3. Electric components SCHNEIDER;
4. DZ-UN from Taiwan or Japan NOK sealings for hydraulic system;
5. Hydraulic top-drive, steadiness and reliability;
6. Electrical hydraulic synchronization, high precision;
7. Deflection compensation unit installed on the top die;
8. Emergency buttons for back and front control panel, also food pedal;
9. Standard top tool & bottom die supplied with the machine;
10. Special tools are optional, will be designed according to your needs;
11. Cylinder stroke is adjustable, according to your bending needs.
12. Backgauge with servomotor + ball screws + linear guideway.
13. Laser safety protection is optional;
14. Standard top & bottom tooling;
15. Fast clamping tool;
16. Standard front support.
17. Delem DA41, DA52, DA69W CNC etc optional.
Place of Origin: anhui, China (Mainland)
Brand Name: ACCURL
Model Number: WC67k
Machine Type: Press Brake
Raw Material: Sheet / Plate Rolling
Material / Metal Processed: Stainless Steel
Extra Services: metal sheet bending
Certification: ISO 9001:2000
After-sales Service Provided: Overseas third-party support available
Hydraulic system: OMG, USA
LENGTH OF TABLE: 4000MM
DISTANCE BETWEEN HOUSING: 3200MM
THROAT DEPTH: 350MM
MAIN MOTOR: 11KW
Color: as customized